Accumulator
or
Search Results
- Fuel
- GAS
- Fuel Delivery
- FI
- ASP.
- N
- Eng. VIN
- -
- Eng. Desg.
- -
Showing parts 1 to 19 out of 19.
0610202
New; with Clutch; Replacement Of Stretch Fit Belt Is Recommended
Part Specifications
- Pulley Diameter
- 4-5/16 in.
- Grooves
- 4
- Clutch Included
- Yes
- Pop. Code
- W
Compressor
Evaporator
7-3033
Drive Type: RWD; with Receiver Drier; From VIN # 4105566 OR Drive Type: AWD; with Receiver Drier; From VIN # Y4118995 OR Drive Type: 4WD; with Receiver Drier; From VIN # Y4118995
Part Specifications
- Type
- Parallel Flow
- Height
- 19-3/4 In.
- Width
- 13-1/4 In.
- Thickness
- 5/8 In.
- Inlet Type
- Block Fitting
- Outlet Type
- Block Fitting
- Pop. Code
- W
Condenser
93081
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Aluminum
- Height
- 4-15/16 in.
- Width
- 7-7/8 in.
- Thickness
- 3/4 in.
- Inlet
- 9/16 in. Diameter
- Outlet
- 9/16 in. Diameter
- Pop. Code
- B
Heater
C-634
Ignition Coil Mounts to Cylinder Head; Qty Req.: 6
Part Specifications
- Ignition Type
- Electronic
- Connector Gender
- Male
- Terminal Count
- 3
- Terminal Shape
- Blade
- Pop. Code
- D
Ignition Coil
CU2087
w/ 19-5/8 in. Between Top Mounting Holes; Inlet And Oulet On Left Side; Radiator Cap Is Required
Part Specifications
- Core Material
- Aluminum
- Tank Material
- Plastic
- Row
- 1
- Height
- 16-3/4 In.
- Width
- 20-3/8 In.
- Thickness
- 1 In.
- Inlet Header
- 21-9/16 In. x 2 In.
- Outlet Header
- 21-9/16 In. x 2 In.
- Inlet
- 1-5/16 In.
- Outlet
- 1-5/16 In.
- TOC
- Concentric
- Pop. Code
- A
Automotive Radiator
FN705
Part Specifications
- Cup Type
- Threaded
- Fuel Type
- Gas
- Diameter
- 1-1/4 in.
- Length
- 8 in.
- Vent 1
- 1/2 in.
- Vent Quantity
- 1
- Pop. Code
- D
Filler Neck
GM67A
Part Specifications
- US Gallon
- 17.4
- Liter
- 66
- Length
- 32-1/4 in.
- Width
- 20 in.
- Height
- 12-3/4 in.
- Kit
- LO-097 (2x), LO-123, LO-S004, LO-S003, LO-S005
- Comments
- W/ Pan In Tank, W/ Cap (Lo-S005) For Tank W/O Pressure Sensor Hole
- Pop. Code
- C
Fuel Tank
LO97
Gasket And Screw Set For Fuel Cut-Off Valve
Part Specifications
- Material
- Polymer
- Outside Diameter
- 2-3/4 in.
- Inside Diameter
- 1-5/16 in.
- Comments
- Screws Included
- Pop. Code
- D
Lock Ring
MA256
Sensor Only
Part Specifications
- Material
- Plastic
- Connector Gender
- Male
- Connector Shape
- Rectangular
- Terminal Shape
- Blade
- Terminal Count
- 3
- Pop. Code
- B
Mass Airflow Sensor
OS5162
Position: Downstream Right; Qty Req.: 1 OR Position: Downstream Left; Qty Req.: 1
Part Specifications
- Type
- Heated
- Sensor Type
- Zirconia
- Connector Shape
- Square
- Connector Gender
- Male
- Terminal Count
- 4
- Overall Length
- 24-3/8 In.
- Thread
- M18 X 1.5 mm
- Wrench Size
- 7/8
- Installation Type
- Screw
- Pop. Code
- W
Oxygen Sensor
OS5163
Position: Upstream Right; Qty Req.: 1 OR Position: Upstream Left; Qty Req.: 1
Part Specifications
- Type
- Heated
- Sensor Type
- Zirconia
- Connector Shape
- Square
- Connector Gender
- Male
- Terminal Count
- 4
- Overall Length
- 9-13/16 In.
- Thread
- M18 X 1.5 mm
- Wrench Size
- 7/8
- Installation Type
- Screw
- Pop. Code
- W
Oxygen Sensor
Crankshaft Position Sensor
SP1118
with In-Tank Pump; Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty
Part Specifications
- Description
- Electrical Fuel Pump
- Fuel Type
- Gas
- Flow Rate
- 44.9 - 54.2 gph
- Pressure Range
- 80 - 109 psi
- Type
- Turbine
- Inlet Type
- Strainer
- Outlet Type
- Hose
- Voltage
- 12
- Gaskets
- No
- Strainers
- No
- Pop. Code
- B
Fuel Pump 
SP6049H
Part Specifications
- Description
- Fuel Pump And Sender Assembly
- Fuel Type
- Gas
- Inlet Type
- Butt Flare - 1/4 in. Diameter
- Outlet Type
- Butt Flare - 5/16 in. Diameter
- Pressure Range
- 80-123 psi
- Flow Rate
- 42-51 gph
- Resistance
- 120-3 Ohms
- Lock-Ring
- Not Included
- O-Ring
- Included
- Strainers
- Included
- Pop. Code
- B
Fuel Module 
ST444
Part Specifications
- Comments
- INCLUDES 2 STRAPS; ST#1 = 28-3/4 in. / ST#2 = 28-3/4 in.
- Pop. Code
- C
Strap
Strainer 
SZP01A
Gasket And/Or Sealant Not Included; Failure to use the vehicle OEM approved sealing method will void the warranty; Position: Lower; Qty Req.: 1
Part Specifications
- Material
- Cold Rolled Steel (EDDQ)
- Height
- 4.75 in
- Drain Plug Thread
- M14 X 1.5
- Liter
- 4.8
- Pop. Code
- D
Oil Pan
